Ask The Charlotte Home Inspector

Your Charlotte Home Inspection Questions Answered!

Ask The Charlotte Home Inspector header image 2

Charlotte Inspector Tells Best Way To Remove Exterior Paint

July 8th, 2009 · No Comments

peeling-paint

There are a few different methods for removing outdoor paint. Depending on the overall project, you’ll either want to remove all of the old paint or remove enough of it to allow a new coat of paint to adhere without the risk of chipping.

If the painted surface is wood:
When refinishing a wooden deck or fence, the best method for removing old paint is to use a power sander. A sander will take off the top layer of the wood, however be careful not to overdo it. Because the project is outdoors, ventilation is not a problem, but you should still wear a breathing mask.

If the painted surface is concrete or brick:
Concrete and brick are porous surfaces and getting paint out of all the cracks and crevices is no easy task. The best way to tackle the job is to use a steam pressure washer. This type of pressure washer uses steam which essentially melts the paint, allowing it to be washed away by the pressurized washer.

If the painted surface is metal:
It can be very difficult to remove paint from a metal surface, especially if you want to preserve the original look and quality of the metal. If scratching the surface is not a concern, then sandblasting will probably work best. If you are concerned about scratching the surface, a chemical paint stripper is ideal, but be sure to follow the manufacturer’s directions regarding proper handling and use.

For more information please go to our website: http://www.homeinspectioncarolina.com/

Be Sociable, Share!
Share

Tags: Home Improvement · House Cleaning · Maintenance · Remodeling

0 responses so far ↓

  • There are no comments yet...Kick things off by filling out the form below.

Leave a Comment