Ask The Charlotte Home Inspector

Your Charlotte Home Inspection Questions Answered!

Ask The Charlotte Home Inspector header image 2

Pneumatic flooring nailer From Hardcore Tools – Laying Wooden Floorings is Now easy

September 16th, 2013 · No Comments

 

The pneumatic flooring nailer from Hardcore Tools is yet another useful product off their amazing variety of tools. The pneumatic flooring nailer I ordered was packed in a attractive carrying case created from durable plastic with specially contoured compartments which, beyond the nailer, hold a mallet, hex tools, air tool oil, base plate, hex keys, hex key wrench, safety goggles and o-rings. Included as well was a concise but comprehensive manual that contains step-by-step instructions concerning how to put the device to better use.

 

I found this lightweight flooring nailer manufactured from cast aluminium is easy to manage and am certain that it will work well for people who have different skill sets, such as most inexperienced users. The nailer, therefore, finds widespread acceptance which is utilized by contractors and also do-it-yourself (DIY) enthusiasts.

 

The pneumatic flooring nailer works with almost any 60 to 100 PSI compressor. It includes a high capacity magazine which decreases substantially on reload time. The nailer is capable of doing driving staples efficiently for the required depth at optimum angles. The product includes non marring base plates which can be suitably adjusted for installing flooring of 1/2 to 3/4 inch thickness.

 

The Hardcore Tools pneumatic flooring nailer is an excellent tool to get handy while fixing various wood floors including Bamboo, Maple, Oak, Brazilian Cherry, Walnut and Hickory which may be handscraped, engineered or prefinished. The long and durable handle of the nailer afflicted me with a good treating the device and made the project much less strenuous.

 

The nail magazine has a generous capacity and can hold upto 100 floor nails. The nail magazine is designed to hold nails of varying lengths ranging from 1 1/2 inches to 2 inches. The dimensions of nails will depend on the task you have accessible.

 

The environment inlet of 1/4 inch is really as per industry standards. This nailer from Hardcore Tools features a very low air consumption, which enabled me to get top rated despite conditions small compressor. The input pressure must be kept from the selection of 60 to 100 PSI.

 

Proper adjustment from the input pressure is essential, depending on the sort of wood you happen to be dealing with on your flooring. Hard and brittle woods like bamboo are given to damaged when the pressure settings are far too high and hence less setting is recommended. Hardwoods like teak possess a dense grain and need a top pressure of 100 PSI. An excellent opportunity one to test the merchandise over a piece of scrap plank, after adjusting it on the appropriate settings, before utilizing your nailer for the actual flooring. This will likely make sure you get good results if you develop the particular flooring.

 

To make use of the Hardcore Tools pneumatic flooring nailer, to begin with it about the side of the plank of hardwood flooring you are planning to secure inside a particular position. Then utilize mallet in the kit to strike the actuator, that can fire the nail in. The operation is easy and maybe the hardest area of the entire process is moving the nailer around the place.

 

With a few practice, you will be able to put hardwood flooring effortlessly, adding to the aesthetics with the interior decor.

Be Sociable, Share!
Share

Tags: Unusual Findings

0 responses so far ↓

  • There are no comments yet...Kick things off by filling out the form below.

Leave a Comment