Ask The Charlotte Home Inspector

Your Charlotte Home Inspection Questions Answered!

Ask The Charlotte Home Inspector header image 2

Pneumatic flooring nailer By Hardcore Tools Review

November 24th, 2013 · No Comments

 

I had been installing wood flooring in my home. I scoured over the markets for the most suitable nail gun. I wasn’t hiring any contractors. I had been a do-it-yourself type and thus needed a gadget that would be both basic and efficient to utilize. After reviewing the huge selection of options, I settled for your Pneumatic flooring nailer by Hardcore Tools.

 

Being a first timer, I needed to proceed through how many other people had said regarding their experiences by it. I decided this model determined by its excellent reviews. Moreover, its features’ descriptions suited my requirements although only by putting it to function could I fully determine its usefulness.

 

The Purchase

 

First, could be the price. I was a little stingy about this as my budget was quite constrained, and i also couldn’t afford huge expenses. However, i’m happy to report and pleasure, upon enquiry I determined that the set price was well within my means. Additionally, they’d slashed the costs by over $50 allowing me to save lots of more. The offer got better. I managed to get free delivery services. Needless to say, after preparations, I immediately placed my order. The delivery time was superb, while i received it barely days after my order.

 

An Effective and Efficient Tool

 

With this particular model, I had created an excellent and simple time installing my bamboo floors. The gun sits quickly and easily each and every time. The bamboo being hard and brittle required low pressure lest it will currently have damaged. Mid-air consumption was low at about 4.5 CFM. This allowed me to utilize small compressor and control the input pressure. Obviously, I was slow in the beginning laying a number of square feet over a little while when i tread with caution on the floor installation. As an illustration, to make sure I might get good result together with the pressure When i first tested it on some scrap plank.

 

For your Experienced and Learning Floor Installers

 

Though new with the whole process, I found it simple to use. I recently placed it on the side of a piece of the bamboo flooring. The mallet then strikes the actuator and also the nail is fired in. Easy. With each successful attempt and a little practice, by my second time at I needed completed your entire house. Actually, the best difficulty I encountered was just moving the Nailer around. It took a while getting used to. The Nailer worked flawlessly. Everyone should take it. No need an expert, nonetheless it allows you to one.

 

The long and durable handle provided great control and kept me from breaking my back. I ran across it to be quite efficient particularly when it found installing different floors at different thicknesses. The non-marring base plates were an easy task to adjust relating to the 1/2 and 3/4 inch floor points. It enabled me to be effective fast, having its high capacity magazine holding 100 nails. Its reload time was fast.

 

An ideal choice

 

Additionally, it came with a resilient travel case for tools. This included safety goggles, hex tools, mallet and o-rings. It becomes an efficient tool for just about any floor installation. I suggest the Pneumatic flooring nailer by Hardcore Tools for it returned in my experience a fantastic value for my money’s worth.

Be Sociable, Share!
Share

Tags: Unusual Findings

0 responses so far ↓

  • There are no comments yet...Kick things off by filling out the form below.

Leave a Comment