http://www.homeinspectioncarolina.com What are the dangers of asbestos? Three home inspection experts recently got together to discuss that very thing. home inspector Preston Sandlin out of Charlotte NC, home inspector George Cline out of Rochester NY, and Chicago home inspector Gary Monfeli talk about the inpecting for asbestos and the hazards associated with it. Asbestos actually comes from the Greek word meaning unextinguishable. The Greeks though of asbestos as the miracle fiber because it wouldn’t burn. The danger associated with asbestos is that once it becomes friable or airborne human lungs cannot metabolize it and it leads to a host of resiratory problems. Watch this video to learn more about asbestos. http://www.homeinspectioncarolina.com

Without a doubt, buying a home can be the largest investment youll ever make. With the average home costing approximately $190,000, many homeowners take great pains to ensure that all cosmetic and structural repairs are attended to. However, the truth is that many expensive repairs could be avoided by simply sticking to a routine maintenance schedule. Routinely checking your home for emerging problems will prevent larger, more expensive problems that leave homeowners scrambling for a quick repair—rather than a cost-effective one. Clearly, regular home maintenance is something you cant afford to ignore.

When to Inspect

Spring is a good time to begin assessing your home for any damage or repairs that need attending to. A good rule of thumb is to check your home at the same time you change your fire alarm batteries—at the beginning (spring) and end (fall) of daylight savings time. Doing so will ensure that minor repairs dont turn into major expenses. Some components of your home may require less-frequent monitoring (foundation), and some may require more (changing the furnace filter). However, taking a walkthrough of your home twice yearly is a good rule of thumb to begin with.

Who Should Inspect

If you feel unqualified to asses every crack and unidentified water leak in your home, feel free to hire a handy man. Not only will he be able to spot any problems, but he can also advise on repairs and costs right on the spot. Do you want a thorough evaluation? Hire a home inspector. Do keep in mind, however, that home inspectors cost much more (around $300) and may not necessarily find every problem.

In most instances, though, simply paying attention to your home is all it takes to spot any emerging problems. For example, if your toilet runs all the time, chances are it needs to be repaired. Have you noticed that your doors dont shut properly anymore? That could be a sign of foundation settling or warping. Simply making a list of things around your home that seem off can make your inspection process much easier

http://www.homeinspectioncarolina.com/

http://www.askthecharlotteinspector.com/

Aluminum wiring, used in some homes from the mid 1960′s to the early 1970′s, is a potential fire hazard. How safe is aluminum wiring?

According to the U.S. Consumer Product Safety Commission, fires and even deaths have been reported to have been caused by this hazard. Problems due to expansion, or more likely micro-fretting and arcing at the connectors, can cause overheating at connections between the wire and devices (switches and outlets) or at splices. The connections can become hot enough to start a fire without ever tripping a circuit breaker!

The photos shown above are not the most dramatic catastrophes linked to fires caused by aluminum wiring. But these are conditions that are found in many homes with aluminum wiring, confirming that this is a real, common, and widespread hazard.

CPSC research shows that “homes wired with aluminum wire manufactured before 1972 are 55 times more likely to have one or more connections reach “Fire Hazard Conditions” than are homes wired with copper. “Post 1972″ aluminum wire is also a concern. Introduction of the aluminum wire “alloys” in 1972 time frame did not solve most of the connection failure problems.

Aluminum wiring is still permitted and used for certain applications, including residential service entrance wiring and single-purpose higher amperage circuits such as 240V air conditioning or electric range circuits. The fire risk from single purpose circuits is much less than for branch circuits.

But it’s not necessarily because of a “new alloy” as some folks assert. It’s because there are enormously fewer connections (four or six rather than 30 or 40 per circuit) and thus statistically a smaller chance of a connection failure. These connections do still burn up, as indicated by field reports.